Building Your Carpentry Skills Needed for Chicken Coop Construction

Chicken Coop Tips

Published by Dave Malcolm

April 24, 2018
Shed decoration

Building a chicken coop has a lot in common with building a house. It’s a good way to hone your carpentry and do-it-yourself skills. You might be surprised at the range of skills required. Before you start, you will need to understand what skills you will need, and then practice them so that your coop will stand the test of time. We have singled out the skills you need to develop to build a chicken coop or a shed. Work through them one-by-one, and jot down any skills you are particularly rusty at or just don’t know at all. You will need to consider two areas: the coop itself, and the outside run for the chickens.

Planning and Layout Skills

 

The old saying of “measure twice, cut once” applies here. You will need to have some skill at planning ahead. You won’t need a formal blueprint, but a good sketch with measurements written in will guide you. Allow at least two square feet of indoor space for each bird, and four square feet outside, again for each bird. You’ll need to plan for shade. Also, make sure the coop is raised about two feet to allow for collecting droppings.

 

Skills Needed:

 

  • Creating and Reading Plans

 

 

Image source: youtube.com

 

Setting Posts

 

Posts will hold your coop firmly and provide anchors for stretching wire around the run. You will need to know how to dig post holes, pour concrete, and place a post so that it is vertical. Make sure you know how to handle a post-hole digger, either manual or powered. You’ll need some expertise in mixing and pouring concrete. Setting a vertical post will require some familiarity with using a level.

 

 

Skills Needed:

 

  • Digging post holes
  • Mixing and pouring concrete
  • Use of a level to make a surface straight vertically

 

Image source: youtube.com

 

Laying a Floor

 

You will need an understanding of how to put up the supports for the floor and lay the flooring boards. You caught a break on this project because the floor just has to be functional, not pretty. But you do have one tricky part to think about. The back one quarter or so of the floor should be chicken wire only because that is where the droppings will fall through.

  • Nailing up floor supports
  • Nailing floorboards
  • Cutting chicken wire to size
  • Stapling chicken wire in place

 

 

Image source: pinterest.com

 

Framing

 

There’s a reason construction sites have a crew just for framing. It’s a skillset all to itself. You will need to develop some framing skills to put up the skeleton of your coop. Many framers build the frame walls lying on the ground and them stand them up to attach them to the structure. You can, instead, build the frame by nailing boards to the posts. This can be difficult if you are working alone. Someone will have to hold up the loose end of the board while you nail one end.

 

Either way, study framing before you start. Build up your knowledge and skill so your structure won’t resemble the Leaning Tower of Pisa instead of a house.

 

Skills Needed:

 

  • Creating wall frames that don’t wobble (using L brackets or corner braces)
  • Providing enough supports in the frames to support wall boards

 

 

 

Image source: youtube.com

 

Roofing

 

A simple, slanted roof will do, so make the back wall shorter than the front wall. You’ll need to know how to install roofing supports. As you learn, you may come across words like “gables,” “trusses” and “rafters,” but for a small project, simple support joists will do.

 

You’ll need boards, such as 1X6s or 1X8s, nailed over on top of the joists, running the direction of the slant, and those will need to be covered with tar paper. A corrugated tin roof usually works well, so you will need to know how to install it over the tar paper.

 

Skills Needed:

 

  • Placing joists or roof-support boards
  • Cutting and placing wide boards to fill in the roof
  • Unrolling and tacking tar paper in place
  • Placing corrugated tin sheets and nailing them down

 

 

 

 

 

 

Exterior Finishing

 

Simple wood siding will fill in the walls. You may need to add to the framing so you will have places to nail the siding. Use your level to make the boards straight.

 

Skills Needed:

 

  • Hanging boards either vertically or horizontally for siding
  • Using a level

 

Interior Finishing

 

You will need a roosting bar and some nests. A roosting bar should be placed along the back wall. This should look like a shelf. So, you will need to know how to put up shelf supports. Across the front wall, create some nesting boxes (one 12-inch box for every four hens). This can be a simple shelf with dividers.

 

 

 

Skills Needed:

 

  • Nailing a wooden bar (2X4 or 4X4) across a span and supporting it
  • Hanging a shelf
  • Placing shelf supports
  • Nailing dividers in place

 

Image source: automaticchickencoopdoor.com

 

Fencing

 

You will need to know how to put up chicken wire. You must first connect your posts with 2X4s nailed across the top of the posts, making a frame for the chicken wire. You should miter the joints where the 2X4s meet to make a neat corner.

 

Because you want to protect against digging animals, you will need the fencing to extend a foot down into the ground. That means you will need to know how to operate a trench digger. You can rent one from a tool company.

 

Once your trench has been dug around the perimeter, and your fencing frame is complete, you can put the wire in place. That means you will learn how to use chicken-wire staples. You’ll need to use a wire stretcher to make the fencing taut across the fence framing.

 

Skills Needed:

 

  • Placing connecting boards across a span
  • Experience in how to use a miter box
  • Digging a uniform trench
  • Using wire staples
  • Stretching wire

 

Hanging a Gate

 

You will need to build a gate using 2X4s. Put a diagonal cross brace in the frame. Then cover with chicken wire. Hang it with hinges. You will need posts where the gate hangs for the hinges on one side and the latch on the other.

 

 

 

Skills Needed:

 

  • Building a gate
  • Stretching wire
  • Mounting hinges

 

How to Build Up Your Skills

 

So, you know what skills you need, but how do you build them up? You’ll need to learn by doing, but that doesn’t mean you have to learn by trial and error.

 

Take each skill in an orderly manner and learn about it. Use a guide to get the basics down, then practice each one.

 

For skills like using a miter box, you can practice on short lengths of boards. Using a level to make a post straight is simple when you see how it is done. Once you understand how to nail floor supports in place, you know how to put up roof joists. Firming up corners of your frames with L brackets, sometimes called corner braces, makes perfect sense the first time you do one. You can learn to place supports for shelves in a few minutes.

 

Skills like mixing concrete and stretching wire are hard to practice, so make sure you understand the idea before you start actually performing the task. Handling tar paper and corrugated tin is learn-as-you-go skills.

 

Some general skills you will need including how to use a sawhorse (to hold up the other end when nailing a horizontal board) and figuring the length of a board that will fit within support boards on either end (subtract the width of the support boards from the length of your cross board). Using power tools requires some serious safety guidelines. You will also find the need to know how to start a nail before you first place a board where you want it so you will have one hand free to hold the board up.

 

Image source: morningchores.com

 

The Bottom Line

 

No single skill for building a chicken coop will overwhelm you. The trick is that you need to understand all of the skills together before you start. You can lose momentum if you stop at every stage and learn the next skill.

 

Use our list to organize the skills and you will have an easier time mastering them. Learn your skills before you buy your supplies, because some of them, such as creating a plan, will determine what supplies you want. As you can see, the idea is to plan ahead on everything. From laying out space you want to use to hang the gate, know each skill you will need along the way.

 

A chicken coop is an excellent way to learn the techniques you will need for larger structures. Evaluate your finished coop, and make note of any areas you would like to improve in. You’ll be on your way to tackling advanced carpentry skills.

 

Published by Dave Malcolm

Leave a Reply

Your email address will not be published. Required fields are marked *